1995 Honda Accord Owner's Manual - Page 185

Lights Replacing a Front Turn Signal Light Bulb TURN SIGNAL ASSEMBLY 6. Push the bulb holder into the turn signal assembly and turn it clockwise until it locks. 7. Test the lights to make sure the new bulb is working. 8. Put the turn signal assembly into the bumper. Make sure the tabs on the turn signal assembly fit into the bumper slots. Tighten the mounting screw. BULB BULB HOLDER 1. Use a Phillips-head screwdriver to loosen the turn signal assembly's mounting screw. 2. Remove the turn signal assembly from the bumper. 3. Remove the bulb holder from the turn signal assembly by turning it counterclockwise. 4. Remove the burned out bulb from the socket by pulling it straight out of its socket. 5. Install the new bulb in the socket. Maintenance