2005 Honda Civic Owner's Manual - Page 101

Playing a Disc To play the tape when a CD is playing, insert a tape in the player (optional). If a tape is in the player, press the TAPE button. Press the CD button again, to switch back to the CD player. If you turn the system off while a CD is playing, either with the Power/ Volume knob or by turning off the ignition switch, the disc will stay in the drive. When you turn the system back on, the CD will begin playing where it left off. On models with in-dash CD changer Loading Discs in the In-dash CD Changer You cannot load and play 3-inch (8-cm) discs in this unit. 4. When the disc load indicator turns green and ''LOAD'' appears in the display again, insert the next disc in the slot. Do not try to insert a disc until ''LOAD'' appears. You could damage the audio unit. 5. Repeat this until all six positions are loaded. If you are not loading all six positions, the system begins playing the last disc loaded. You can also load a disc into an empty position while a disc is playing by pressing the appropriate preset button. The system stops playing the current disc and starts the loading sequence. It plays the disc just loaded. Your vehicle's in-dash CD changer hold up to six discs. 1. Press the LOAD button until you hear beep and see ''LOAD'' in the display. To load only one disc, press and release the LOAD button. The green disc load indicator will come on. 2. The disc number for an empty position begins blinking. 3. Insert the disc into the disc slot when the green disc load indicator comes on. Insert it only about halfway; the drive will pull it in the rest of the way. You will see ''BUSY'' in the display while the disc load indicator turns red and blinks as the disc is loaded. Features CONTINUED 101