2012 Honda Accord Owner's Manual - Page 363

Lights 6. Install the new bulb, and turn it one-quarter turn clockwise to lock it in place. 7. Push the electrical connector onto the bulb. 8. Turn on the headlights to test the new bulb. 9. Put the inner fender cover in place. Install the two holding clips. Lock each one in place by pushing on the center. BULB V6 model is shown. STAY Replacing a Front Turn Signal/ Parking Light Bulb 1. Open the hood. To change the turn signal bulb on the passenger's side, remove the engine coolant reserve tank by pulling it out of its stay. Driver's side on V6 models 2. Remove the socket from the headlight assembly by turning it one-quarter turn counterclockwise. 3. To remove the burned out bulb, push it in and turn it counterclockwise until it unlocks. Maintenance Remove the air intake duct (see page 358 ). 360 2012 Accord Sedan