2012 Honda Accord Owner's Manual - Page 87
2012 Honda Accord Manual
Page 87 highlights
Door Locks 3. Push and hold the front of the master door lock switch on the driver's door. You will hear a click. Keep holding the switch until you hear another click (after about 5 seconds). 4. Release the switch, and within 20 seconds, turn the ignition switch to the LOCK (0) position. To program the Drive Lock mode: Locks all doors when the vehicle's speed reaches about 10 mph (15 km/h). 4. Push and hold the front of the master door lock switch on the driver's door. You will hear a click. Keep holding the switch until you hear another click (after about 5 seconds). 5. Release the switch, and within 20 seconds, turn the ignition switch to the ACCESSORY (I) position. On A/T vehicles, move the shift lever to the Park (P) position. 6. Turn the ignition switch to the LOCK (0) position. Instruments and Controls 1. Make sure the shift lever is in the Park (P) position (A/T vehicles). 2. Turn the ignition switch to the ON (II) position, and make sure to close the driver's door. 3. On A/T vehicles, push and hold the brake pedal, and move the shift lever out of the Park (P) position. 84 2012 Accord Sedan