2012 Honda Accord Owner's Manual - Page 364
2012 Honda Accord Manual
Page 364 highlights
Lights 4. Install the new bulb and turn it clockwise to lock it in place. 5. Insert the socket back into the headlight assembly. Turn it clockwise to lock it in place. 6. Turn on the lights to make sure the new bulb is working. 7. Passenger's side Reinstall the coolant reserve tank. Driver's side on V6 models Replacing a Front Side Marker Light Bulb HOLDING CLIPS BULB Reinstall the air intake cover and duct securely. Reinstall the fastener and secure it by pushing on the head until it locks. 1. To change the bulb on the driver's side, start the engine, turn the steering wheel all the way to the right, then turn off the engine. To change the bulb on the passenger's side, turn the steering wheel to the left. 2. Use a flat-tip screwdriver to remove the two holding clips from the inner fender. 3. Remove the socket from the headlight assembly by turning it one-quarter turn counterclockwise. 4. Pull the burned out bulb straight out of its socket. Push the new bulb straight into the socket until it bottoms. Maintenance CONTINUED 2012 Accord Sedan 361