2012 Honda Accord Owner's Manual - Page 46
2012 Honda Accord Manual
Page 46 highlights
Selecting a Child Seat, Installing a Child Seat Important considerations when selecting a child seat Make sure the child seat meets the following three requirements: The child seat is the correct type and size for the child. The child seat is the correct type for the seating position. The child seat is compliant with Federal Motor Vehicle Safety Standard 213 or Canadian Motor Vehicle Safety Standard 213. Installing a Child Seat After selecting a proper child seat and a good place to install the seat, there are three main steps in installing the seat: 1. Properly secure the child seat to the vehicle. All child seats must be movement can be expected and should not reduce the child seat's effectiveness. Driver and Passenger Safety If the child seat is not secure, try installing it in a different seating position, or use a different style of child seat that can be firmly secured. 3. Secure the child in the child seat. secured to the vehicle with the lap part of a lap/shoulder belt or with the LATCH (Lower Anchors and Tethers for CHildren) system. A child whose seat is not properly secured to the vehicle can be endangered in a crash. 2. Make sure the child seat is firmly secured. After installing a child Make sure the child is properly strapped in the child seat according to the child seat maker's instructions. A child who is not properly secured in a child seat can be seriously injured in a crash. The following pages provide guidelines on how to properly install a child seat. A forward-facing child seat is used in all examples, but the instructions are the same for rearfacing child seats. seat, push and pull the seat forward and from side-to-side to verify that it is secure. A child seat secured with a seat belt should be installed as firmly as possible. However, it does not need to be ''rock solid.'' Some side-to-side 2012 Accord Sedan 43