2012 Honda Accord Owner's Manual - Page 368

Lights HOLDING CLIPS TAB ELECTRICAL CONNECTOR TAB ELECTRICAL CONNECTOR 2. Remove the electrical connector from the bulb by pushing on the tab to unlock it, then slide the connector off the bulb. 3. Remove the bulb by turning it about one-quarter turn counterclockwise. 4. Driver's side To change the bulb, start the engine, turn the steering wheel all the way to the right, then turn off the engine. 5. Use a flat-tip screwdriver to remove the two holding clips from the inner fender, and pull the inner fender cover back. 6. Remove the electrical connector from the bulb by pushing on the tab and pulling the connector down. 7. Remove the bulb from the fog light assembly by turning it onequarter turn counterclockwise. Maintenance CONTINUED 2012 Accord Sedan 365