2007 Infiniti FX35 Owner's Manual - Page 176

VENTILATORS The vehicle clearance lines are wider than the actual clearance. camera, objects may not be displayed clearly. Vertical lines may be seen in objects on the screen. This is due to strong reflected light from the bumper. This is not a malfunction. The screen may flicker under fluorescent light. This is not a malfunction. The colors of objects on the rear view monitor may differ somewhat from those of the actual object. When the contrast of objects is low at night, pushing the ENTER " " button may not change the brightness. Objects on the monitor may not be clear in a dark place or at night. If dirt, rain or snow attaches to the camera, the rear view monitor may not clearly display objects. Clean the camera. To clean the camera, wipe with a cloth dampened with diluted mild cleaning agent and then wipe with a dry cloth. Do not use body wax on the camera window. Wipe off any wax with a clean cloth dampened with mild detergent diluted with water. SAA0708A ADJUSTING THE SCREEN To adjust the quality of the screen, refer to "HOW TO USE THE "SETTING" BUTTON" in this section. OPERATING TIPS When the selector lever is shifted to R, the display screen automatically changes to the rearview monitor mode. However, the radio can be heard. It may take some time for the rearview monitor to display after the selector lever has been shifted to R. Objects may be distorted momentarily. When the selector lever is returned to a position other than R, it may take some time for the screen to change. Objects on the screen may be distorted until they are completely displayed. When the temperature is extremely high or low, the screen may not clearly display objects. This is not a malfunction. When strong light directly enters the Front Open or close, and adjust the air flow direction of ventilators. : This symbol indicates that the vents are closed. : This symbol indicates that the vents are open. 4-20 Display screen, heater, air conditioner and audio systems