2007 Infiniti FX35 Owner's Manual - Page 38

CHILD RESTRAINT INSTALLATION USING LATCH WARNING Attach LATCH compatible child restraints only at the locations shown. For the LATCH lower anchor locations, see "Lower Anchors and Tethers for CHildren System (LATCH)" in this section. If a child restraint is not secured properly, your child could be seriously injured or killed in an accident. The LATCH anchors are designed to withstand only those loads imposed by correctly fitted child restraints. Under no circumstance are they to be used for adult seat belts or harnesses. Inspect the lower anchors by inserting your fingers into the lower anchor area and feeling to make sure there are no obstructions over the LATCH anchors, such as seat belt webbing or seat cushion material. The child restraint will not be secured properly if the LATCH anchors are obstructed. Front-facing Front facing - step 3 SSS0645 Follow these steps to install a front-facing child restraint using LATCH: 1. Adjust the seatback so that it is upright. Do not move the rear seatbacks with the child restraints attached to them. 2. Position the child restraint on the seat. Always follow the child restraint manufacturer's instructions. Front facing - step 3 3. Secure the child restraint anchor attachments to the LATCH lower anchors. Check to make sure the LATCH attachment is properly attached to the lower anchors. 4. The back of the child restraint should be secured against the vehicle seatback. If necessary, adjust or remove the head restraint to obtain the correct child restraint fit. See "Head restraint adjustment" in this section. When the head restraint is removed, store it in a secure place. Be sure to install the head restraint when the child restraint is removed. SSS0646 1-24 Safety - Seats, seat belts and supplemental restraint system