1996 Lexus GS 300 Owners Manual - Page 186
1996 Lexus GS 300 Manual
Page 186 highlights
ENGINE Remove the oil filler cap and add engine oil a little at a time, checking the dipstick. The approximate quantity of oil needed to fill between the low level mark and the full level mark on the dipstick is indicated below for reference. When the level reaches within the correct range, return the filler cap and turn the cap clockwise until you hear a click. Oil quantity. L (qt., Imp. qt.) 1.8 (1.9, 1.6) Oil identification marks NOTICE Avoid overfilling, or the engine could be damaged. Check the oil level on the dipstick once again after adding oil. Engine oil selection Use API SH, Energy-Conserving II multigrade engine oil or ILSAC multigrade engine oil. Recommended viscosity (SAE): SAE 5W-30 is the best choice for your vehicle, for good fuel economy, and good starting in cold weather. If you use SAE 10W-30 engine oil in extremely low temperatures, the engine may become difficult to start, so SAE 5W-30 engine oil is recommended. 172 Either or both API registered marks are added to some oil containers to help you select the oil you should use. S The API Service Symbol is located anywhere on the outside of the container. The top portion of the label shows the oil quality by API (American Petroleum Institute) designation such as SH. The center portion of the label shows the SAE viscosity grade such as SAE 5W-30. "Energy-Conserving II," shown in the lower portion, indicates that the oil has fuel-saving capabilities. Oils marked "Energy- Conserving II" will have higher fuel-saving capabilities than oils marked "Energy-Conserving." S The ILSAC (International Lubricant Standardization and Approval Committee) Certification Mark is displayed on the front of the container.