1996 Lexus GS 300 Owners Manual - Page 85
1996 Lexus GS 300 Manual
Page 85 highlights
COMFORT ADJUSTMENT INSTALLATION ON CENTER REAR SEAT 4. Insert a 15 mm (0.6 in.) spacer, and tighten down the anchor bracket for your child restraint system with a bolt. Torque the bolt to 16.5 - 24.7 N·m (1.68 - 2.52 kgf·m, 12.2 - 18.2 ft·lbf). To comply with the Canada Motor Vehicle Safety Standards, vehicles sold in Canada are provided with a bracket set in the glovebox, designed for use with any of three anchor locations shown in the illustration. When installing a rear-facing child restraint system, follow the same procedure as when installing a forward-facing child restraint system. 1. Fasten the center lap belt over the child restraint system following the instructions provided by its manufacturer. 72
COMFORT ADJUSTMENT
72
4.
Insert a 15 mm (0.6 in.) spacer, and tighten down the
anchor bracket for your child restraint system with a bolt.
Torque the bolt to 16.5 – 24.7 N·m (1.68 – 2.52 kgf·m, 12.2
– 18.2 ft·lbf).
To comply with the Canada Motor Vehicle Safety Standards,
vehicles sold in Canada are provided with a bracket set in the
glovebox, designed for use with any of three anchor
locations shown in the illustration.
INSTALLATION ON CENTER REAR SEAT
When installing a rear–facing child restraint system, follow
the same procedure as when installing a forward–facing
child restraint system.
1.
Fasten the center lap belt over the child restraint system
following the instructions provided by its manufacturer.