2004 Mazda MAZDA6 Owner's Manual - Page 198

J56J_8S11-EA-03G_Edition1.book Page 52 Tuesday, June 24, 2003 6:29 PM Interior Comfort Interior Equipment Accessory Socket The ignition switch must be in the ACC or ON position. Only use genuine Mazda accessories or the equivalent requiring no greater than 120 W (DC12 V, 10 A). When placing an electrical device (e.g. cellular phone) in the tray which is connected with the accessory socket, pass the plug cord through the slot in the cap. Cap slot, closed Cap slot, opened 1. Open the lid by pulling the upper release catch. 2. Remove the tray mat. 3. Using a coin, turn the cap counterclockwise (about 45° from the closed position) and remove it. CAUTION To prevent accessory socket damage or electrical failure, pay attention to the following: • Don't use accessories that require more than 120 W (DC12 V, 10 A). • Don't use accessories that are not genuine Mazda accessories or the equivalent. • Close the cover when the accessory socket is not in use. • Correctly insert the plug into the accessory socket. NOTE 4. Open the tray by pulling the lower release catch. To prevent discharging the battery, don't use the socket for long periods with the engine off or idling. 6-52 Form No. 8S11-EA-03G