2004 Mazda MAZDA6 Owner's Manual - Page 254

J56J_8S11-EA-03G_Edition1.book Page 34 Tuesday, June 24, 2003 6:29 PM Maintenance and Care Owner Maintenance License plate lights 1. Wrap a flathead screwdriver with a soft cloth to prevent damage to the lens and remove the lens by carefully prying on the edge of the lens with a flathead screwdriver. 2. Disconnect the bulb by pulling it out. M Replacing Interior Light Bulbs Overhead light/Map lights (With overhead console) 1. Remove the screws. 2. Wrap a flathead screwdriver with a soft cloth to prevent damage to the trim and gently insert it in the overhead light as shown in the figure, and then remove the overhead light unit. 3. Install the new bulb in the reverse order of removal. 3. Turn the socket and bulb assembly counterclockwise and remove it. 4. Disconnect the bulb from the socket. Socket 5. Install the new bulb in the reverse order of removal. 8-34 Form No. 8S11-EA-03G