1998 Mercury Villager Owner Guide 1st Printing - Page 284

Checking Engine Oil Check the engine oil each time you fuel your vehicle. 1. Make sure the vehicle is on level ground. 2. Turn the engine off and wait a few minutes for the oil to drain into the oil pan. 3. Set the parking brake and ensure the gearshift is securely latched in Park, ЉPЉ. 4. Open the hood. Protect yourself from engine heat. 5. Locate and carefully remove the engine oil level indicator (dip stick). 6. Wipe the indicator clean. Insert the indicator fully, then remove it again. Ⅵ If the oil level is between the L and H marks, the oil level is acceptable. DO NOT ADD OIL Ⅵ If the level is below the L mark, add enough oil to raise the level within the L-H range WARNING Oil level above the H mark may cause engine damage. Some oil must be removed from the engine by a service technician. 7. Put the indicator back in and ensure it is fully seated. 280