1998 Mercury Villager Owner Guide 1st Printing - Page 296

Engine compartment main fuse panel When checking fluid at normal operating temperature, the fluid level should be within the crosshatched area on the dipstick. When the vehicle has not been driven, and outside temperature is above 50° F (10° C), the fluid level should be between the notches on the dipstick. WARNING Your vehicle should not be driven if the transmission fluid level is below the bottom notch on the dipstick. Adding Automatic Transmission Fluid The fluid type is stamped on the dipstick. Before adding any fluid, be sure that the correct type will be used. Add fluid in 1/2 pint (0.25 liter) increments through the filler tube to bring the level to the correct area on the dipstick. If an overfill occurs, excess fluid should be removed by a qualified technician. 292