2004 Nissan Murano Owner's Manual - Page 127

The display is updated every 30 seconds. At about the first 30 seconds and 1/3 miles (500 m) after a reset or connecting battery cable, the display will show (----). clock will not indicate the correct time. Readjust the time. Adjusting the time To adjust the time, push the "H" or "M" button for more than approximately 1.5 seconds. The time indicator will flash. Touch the H button to adjust the hour. Touch the M button to adjust the minute. To finish the adjusting, press the "PREV" button or the screen will return to normal after 10 seconds. Distance to empty (DTE - mile or km) The distance to empty (DTE) mode provides you with an estimation of the distance that can be driven before refueling. The DTE is constantly being calculated, based on the amount of fuel in the fuel tank and the actual fuel consumption. SAA0797 The display is updated every 30 seconds. When the fuel level drops even lower, the DTE display will change to (*). NOTE: ¼ The DTE reading may not change from the previous reading if the amount of fuel added is small. ¼ Fuel moving in the tank while driving may cause the reading to momentarily change. HOW TO USE "E/M" BUTTON You can change the unit as follows using the "E/M" (English/Metric) button. Unit: US - Mile, °F, MPG Metric - km, °C, L/100 km HOW TO USE "FUEL ECON" BUTTON The average fuel consumption (MPG or L/100 km) and the distance to empty (DTE - MI or km) will appear on the screen when the "FUEL ECON" button is pushed. Average fuel consumption (Mpg or L/100 km) The average fuel consumption mode shows the average fuel consumption since the last reset. Resetting is done by pressing the "TRIP RESET" or "FUEL ECON" button for more than approximately 1.5 seconds. CLOCK The digital clock displays time when the ignition key is in ACC or ON. If the power supply is disconnected, the 4-4 Display screen, heater, air conditioner and audio systems