2002 Saab 9-5 Owner's Manual - Page 82
2002 Saab 9-5 Manual
Page 82 highlights
82 Instruments and controls The following settings will be used when the heater is running: • Air distribution in AUTO mode. • Recirculation not active but can be selected manually. • Fan speed is automatic and cannot be changed. • Only the fan speed is shown on the display. If AUTO is pressed, the system selections will be indicated. The following controls do not operate while the afterheater is on: • Rear-window heating. • ECON. • User presets. Some of the functions can be reprogrammed. For further information, please consult your Saab dealer (see page 259). Afterheater, V6-engine cars The afterheater enables a comfortable temperature to be maintained inside the car even after the engine has been switched off. The heater can be activated up to 10 minutes after the engine has stopped, although the coolant temperature must be at least 104°F (40°C) for the heater to operate. To start the heater: 1 The ignition should be OFF. 2 Press and hold the AUTO button on the ACC panel for about a second, until a chime is sounded and the following appears on the SID: "SPARE HEATER ACTIVATED". After five seconds, the SID will indicate how much heat is available (0 - 100%). To switch off the heater: 1 Press the OFF button on the ACC panel. The heater will also be switched off if the ignition is turned ON.