2002 Saab 9-5 Owner's Manual - Page 94

94 Saab 9-5 Audio System Random playback (RDM) (2) Press and hold the CD/RDM button to select/deselect random playback of the current disc. When this function is selected, RDM will appear at the bottom of the display. Press once to move from the current track to the next during random playback. Press once to repeat the current track during random playback. Pressing and holding or will start Rapid play. Press any segment of the SEEK button during scanning to play the current track from the beginning and simultaneously cancel the SCAN function. Fast track search Press (mid-segment) once to switch between the CD-PLAY and CD-TRACK modes. Eject (3) Press to remove the disc. If you press the eject button to open the tray but do not remove the disc, the CD player will automatically close the tray again after 10 seconds, without restarting playback. The CD-PLAY and CD-TRACK modes change the function of and . The selected mode will also be active the next time the system is switched on. Choose the mode that you find most convenient: CD PLAY Pressing and holding or briefly starts Rapid play Pressing and holding or briefly starts Fast track search SCAN To start the SCAN function, which enables you to hear a sample of each track on the disc, press and hold (mid-segment). The display shows that SCAN is in progress and which track is currently being sampled. For instance, if you started SCAN while playing the first track, the following display will appear: CD TRACK The sample playback starts 30 seconds after the start of the track and lasts for 8 seconds. When all the tracks on the disc have been scanned, the system will revert to playback of the track that was playing when SCAN was selected.