2003 Subaru Forester Owner's Manual - Page 129
2003 Subaru Forester Manual
Page 129 highlights
Instruments and controls Do not operate the engine with the oil pressure warning light on. This may cause serious engine damage. switch is turned to the "ON" position and goes out after about two seconds. This is an indication that the ABS system is working properly. ! AT OIL TEMPerature warning light (for AT vehicles) If this light comes on when the engine is running, it may indicate that the automatic transmission fluid temperature is too hot. If the light comes on while driving, it is unnecessary to stop the vehicle, but avoid driving up steep grades or in stop and go traffic. ! Automatic transmission control system warning If the light flashes after the engine starts, it may indicate that the automatic transmission control system is not working properly. Contact your nearest SUBARU dealer for service immediately. If the warning light behaves as follows, the ABS system may not work properly. When the warning light is on, the ABS function shuts down; however, the conventional brake system continues to operate normally. " The warning light does not come on when the ignition switch is turned to the "ON" position. " The warning light comes on when the ignition switch is turned to the "ON" position, but it does not go out even when the vehicle speed exceeds approximately 8 mph (12 km/h). " The warning light comes on during driving. If these occur, have the ABS system repaired at the first available opportunity by your SUBARU dealer. With a vehicle equipped with an EBD system, the ABS warning light comes on together with the brake system warning light if the EBD system becomes faulty. For ! ABS warning light (U.S.) (Canada) The ABS warning light comes on when the ignition 3-12