2003 Subaru Forester Owner's Manual - Page 193

Audio ! Weather band button (WB) Push the "WB" button (2) when the radio is off to turn on the radio in the weather band. Press the "WB" button when the radio is on to select the weather band. ! Manual tuning (TUNE) mediately to increase the tuning frequency and turn the tuning knob counterclockwise and release it immediately to decrease the tuning frequency. Each time the knob is turned, the frequency changes 10 kHz in the AM waveband and 0.2 MHz in the FM waveband. " Manual tuning for weather band Turn the tuning knob (4) clockwise and release it immediately to change the WB channel up and turn the tuning knob counterclockwise and release it immediately to change the WB channel down. Each time the knob is turned, the WB channel changes to the next channel. " Seek tuning Turn the tuning knob (4) and hold it for more than a half second. Seek tuning will operate and stop automatically on the next station. Continue this operation until you find the desired station. ! Automatic tuning (SCAN) Press the "SCAN" button (3) to change the radio to the SCAN mode. In this mode, the radio scans through the radio band until a station is found. The radio will stop at the station for five seconds while displaying the frequency, after which scanning will continue until the en- HS5015BA : : : : Tuning to a higher frequency Tuning to a lower frequency Seeking the next higher station Seeking the next lower station " Manual tuning for AM and FM Turn the tuning knob (4) clockwise and release it im- 5-20