2003 Subaru Forester Owner's Manual - Page 249

Starting and operating ter's needle will enter the red area if these speeds are exceeded. When shifting down a gear, it is important to confirm that the current vehicle speed is not in excess of the Maximum Allowable Speed of the gear which is about to be selected. Exceeding the Maximum Allowable Speeds will result in over-revving of the engine. In addition a powerful engine brake will engage and control of the vehicle may be lost. mph (km/h) X and XS 1st 2nd 3rd 34 (54) 62 (100) 101 (162) When shifting down a gear, ensure that the vehicle is not travelling at a speed exceeding the Maximum Allowable Speed for the gear which is about to be selected. Failure to observe this precaution can lead to engine over-revving and this in turn can result in engine damage. In addition, sudden application of engine brakes when the vehicle is travelling on a slippery surface can lead to wheel locking; as a consequence, control of the vehicle may be lost and the risk of an accident increased. ! Driving tips " Always apply the foot or parking brake when the vehicle is stopped in the "D", "3", "2", "1" or "R" position. " Always set the parking brake when parking your vehicle. Do not hold the vehicle with only the transmission. " Do not keep the vehicle in a stationary position on an uphill grade by using the "D", "3", "2", or "1" position. Use the brake instead. NOTE In order to prevent over-revving during deceleration of the vehicle, the transmission will remain in the current gear if the speed of the vehicle is in excess of the Maximum Allowable Speed for the gear to which the selector lever has been moved. ! Shift lock release If the selector lever does not move from the "P" posi- 7-18