3Com 3CR16708-91 Getting Started Guide - Page 24
Wall-mounting, Mounting Instructions for Cement Walls, Mounting, Instructions for, Cement Walls
UPC - 662705487151
View all 3Com 3CR16708-91 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
24 CHAPTER 2: INSTALLING THE SWITCH To fit another unit: 1 Rest the second unit on the top of the clip and align it with the front of the unit below. 2 Press down gently on the unit to secure in onto the clip, ensuring the fastening pieces fit into the slots on the unit below, as shown in Figure 5 (picture 2). Figure 5 Stacking Your Units together 1 Fastening 2 Piece Fastening Piece Wall-mounting There are two slots on the underside of the Switch that can be used for wall mounting. The Switch must be mounted with the LEDs facing upwards. When wall mounting the unit, ensure it is within reach of the power outlet. When wall mounting the unit, ensure that the rubber feet are not fixed. Mounting To wall mount the unit on a cement wall, follow these instructions: Instructions for Cement Walls 1 Make two holes 150 mm (5.9 in.) apart and insert two nylon or similar screw anchors that are suitable for the wall construction. 2 Fix two suitable screws into the anchors, leaving their heads 3 mm (0.12 in.) clear of the wall surface. The screws should be at least 30 mm (1.2 in.) long. 3 Remove any connections from the Switch and locate it over the screw heads. When in line, gently push the Switch on to the wall and move downwards to secure.