3Com 3CR16708-91 Getting Started Guide - Page 44

Web Interface Management, SNMP Management, Refer to Setting Up Web Interface Management

Page 44 highlights

44 CHAPTER 3: SETTING UP FOR MANAGEMENT Figure 12 CLI management via the console port Switch Workstation (with terminal emulation software installed) Standard Null Modem Cable Figure 13 CLI management over the network Console Port Connection Refer to "Setting Up Command Line Interface Management" on page 45. Web Interface Each Switch has an internal set of web pages that allow you to manage Management the Switch using a Web browser remotely over an IP network (see Figure 14). Figure 14 Web interface management over the network Refer to "Setting Up Web Interface Management" on page 46. SNMP Management You can manage a Switch using any network management workstation running the Simple Network Management Protocol (SNMP) as shown in Figure 15. For example, you can use the 3Com Network Supervisor software that is provided on the CD-ROM that accompanies your Switch.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80

44
C
HAPTER
3: S
ETTING
U
P
FOR
M
ANAGEMENT
Figure 12
CLI management via the console port
Figure 13
CLI management over the network
Refer to “Setting Up Command Line Interface Management” on
page 45.
Web Interface
Management
Each Switch has an internal set of web pages that allow you to manage
the Switch using a Web browser remotely over an IP network (see
Figure 14).
Figure 14
Web interface management over the network
Refer to “Setting Up Web Interface Management” on page 46.
SNMP Management
You can manage a Switch using any network management workstation
running the Simple Network Management Protocol (SNMP) as shown in
Figure 15. For example, you can use the 3Com Network Supervisor
software that is provided on the CD-ROM that accompanies your Switch.
Console Port
Connection
Standard Null Modem Cable
Workstation
(with terminal emulation
software
installed)
Switch