3Com 3CRWDR300A-73-US User Guide - Page 109
Gateway, Apply, Network Address: 10.1.4.0
UPC - 662705532424
View all 3Com 3CRWDR300A-73-US manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
Advanced 107 ■ Gateway - the Router used to route data to the network specified by the network address. ■ Interface - select the interface. Note that you should only configure either the Gateway information or select the Interface. After you have finished making changes to the table, click Apply. Here is an example of setting up a static route. ■ IP address of your PC: 10.1.4.52 ■ Subnet mask: 255.255.252.0 ■ Default Gateway: 10.1.4.254 ■ Network Address: 10.1.4.0 Figure 84 Add Static Route Example Screen
Advanced
107
■
Gateway
— the Router used to route data to the network specified by
the network address.
■
Interface — select the interface.
Note that you should only configure either the Gateway information or
select the Interface. After you have finished making changes to the table,
click
Apply
.
Here is an example of setting up a static route.
■
IP address of your PC: 10.1.4.52
■
Subnet mask: 255.255.252.0
■
Default Gateway: 10.1.4.254
■
Network Address: 10.1.4.0
Figure 84
Add Static Route Example Screen