3Com 3CRWDR300A-73-US User Guide - Page 46
Routing Mode over ATM, WAN IP, Subnet Mask, Default Gateway, VPI/VCI, Encapsulation
UPC - 662705532424
View all 3Com 3CRWDR300A-73-US manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
44 CHAPTER 4: RUNNING THE SETUP WIZARD Routing Mode over ATM The Routing Mode over ATM uses fixed/static IP addresses, which are provided by your ISP, to connect to the Internet. Obtain the information on this screen from your ISP. Figure 30 Routing mode over ATM Screen 1 Enter your Internet IP address in the WAN IP field. 2 Enter the subnet mask in the Subnet Mask field. 3 Enter the default gateway IP address in the Default Gateway field. 4 Enter the DNS address in the DNS field. 5 Enter your VPI and VCI information in the VPI/VCI fields. 6 Select the encapsulation type (LLC or VC MUX) in the Encapsulation drop-down menu. This information should be provided to you by your ISP. Check all of your settings, and then click Next. The LAN Settings screen will then be displayed (refer to Figure 32).