3Com 3CRWDR300A-73-US User Guide - Page 125

Tunnel Name, User name, Password, Idle Timeout, PPTP Client, reconnect, PPTP Server, Pre-shared Key

Get 3Com 3CRWDR300A-73-US - ADSL Wireless 11n Firewall Router PDF manuals and user guides
UPC - 662705532424
View all 3Com 3CRWDR300A-73-US manuals
Add to My Manuals
Save this manual to your list of manuals

Page 125 highlights

Figure 100 Add new PPTP VPN Tunnel Screen VPN 123 1 Set the Tunnel Type to PPTP. 2 Enter a descriptive name for the tunnel in the Tunnel Name field. 3 Enter the User name and Password. 4 Enter the Idle Timeout value. 5 Set the PPTP Type Setting to PPTP Server, or PPTP Client. ■ if you set the type as PPTP Client, then set the Local Type Setting to Network or Host, then enter the Remote Server IP. Check the Auto reconnect box, if you want to auto-reconnect after disconnection. ■ if the PPTP Type Setting is set to PPTP Server, go to step 6. 6 Check the box to enable the Remote Network Setting, and then enter the Remote Network Address, and Remote Subnet Mask information. 7 When the PPTP Type Setting is set to PPTP Client, you would then need to enter the Pre-shared Key information. 8 Click Apply.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
VPN
123
Figure 100
Add new PPTP VPN Tunnel Screen
1
Set the Tunnel Type to
PPTP
.
2
Enter a descriptive name for the tunnel in the
Tunnel Name
field.
3
Enter the
User name
and
Password
.
4
Enter the
Idle Timeout
value.
5
Set the PPTP Type Setting to PPTP Server, or PPTP Client.
■
if you set the type as
PPTP Client
, then set the Local Type Setting to
Network or Host, then enter the Remote Server IP. Check the
Auto
reconnect
box, if you want to auto-reconnect after disconnection.
■
if the PPTP Type Setting is set to
PPTP Server
, go to step 6.
6
Check the box to enable the Remote Network Setting, and then enter the
Remote Network Address, and Remote Subnet Mask information.
7
When the PPTP Type Setting is set to PPTP Client, you would then need to
enter the
Pre-shared Key
information.
8
Click
Apply
.