3Com 3CRWDR300A-73-US User Guide - Page 45
Bridge Mode, VPI/VCI, Encapsulation
UPC - 662705532424
View all 3Com 3CRWDR300A-73-US manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Accessing the Setup Wizard 43 Bridge Mode (for a single PC) Selecting the Bridge mode sets the device into 1483 bridging mode in which the device connects LANs and WAN together. It operates as a Data Link Layer device that acts to limit the traffic between two network segments by filtering the data between them based on the hardware address. To set up the Router for use with an RFC1483 bridged connection, use the following procedure: Figure 29 Bridged Mode Screen 1 Enter your VPI and VCI information in the VPI/VCI fields. 2 Select the encapsulation type (LLC or VC MUX) in the Encapsulation drop-down menu. This information should be provided to you by your ISP. Check all of your settings, and then click Next. The LAN Settings screen will then be displayed (refer to Figure 32).