3Com 3CRWDR300A-73-US User Guide - Page 82
PPPoA, protocol, Username, Password, Confirm Password, always connected, auto, manual, Connect type
UPC - 662705532424
View all 3Com 3CRWDR300A-73-US manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
80 CHAPTER 5: CONFIGURING THE ROUTER PPPoA PPP over ATM, this is a popular choice among European DSL providers. To configure this function correctly, you should obtain the information from your ISP. Figure 62 PPPoA Settings Screen 1 Select PPPoA from the protocol drop-down menu. 2 IP assigned by ISP, if select Yes, then no need to enter the IP address and Subnet mask information. If select No, then enter the IP address and Subnet mask information. 3 Enter the user name assigned to you by your ISP in the Username field. And enter the password assigned to you by your ISP in the Password field. Re-enter your password in the Confirm Password field. 4 Select always connected, auto, or manual from the Connect type drop-down menu. If you have a flat rate service charge for Internet connection, select always connected. If your ISP charges you by the minute, do not select this mode. 5 If you want your Router to automatically disconnect from the Internet after a period of inactivity, specify a time in the Idle Time field. (Enter a value of 0 to disable this timeout). 6 Enter the MTU value in the MTU field. Do not make changes to this setting, unless your ISP specifically requires a different setting other than 1454.