3Com 3CRWDR300A-73-US User Guide - Page 121
subnet mask in the Remote Network Address, and Remote Subnet Mask, the Remote Network Address
UPC - 662705532424
View all 3Com 3CRWDR300A-73-US manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 121 highlights
Figure 96 Add New VPN Tunnel Configuration Screen VPN 119 On the VPN Tunnel Parameter screen, 1 Set the VPN Tunnel Type to IPSec. 2 Enter a descriptive name for the tunnel in the Tunnel Name field. 3 Remote VPN Gateway - select IP address, and then enter the IP address in the IP Address/Host Name field. If you select ANY, then it would be no need to enter the IP address, as any remote server can be used. 4 At the Remote Party ID drop-down list, select either IP_IPV4_ADDR or ID_USER_FQDN. This information must be entered identically on the IPSec software installed on the client's machine. If IP_IPV4_ADDR is selected, then enter the IP address and subnet mask in the Remote Network Address, and Remote Subnet Mask fields. The remote network address is usually the network address of the LAN connected to the remote server. If ID_USER_FQDN is selected, then enter the name for the Remote Party ID in the text box area next to the drop-down menu. This name must be unique for each connection rule that you create. Enter the IP address and subnet mask in the Remote Network Address, and Remote Subnet Mask fields. Note that if you select IKE Main Mode from the Key Management drop-down menu (see step 6), you must enter IP_IPV4_ADDR here.