ASRock 939S56-M RAID Installation Guide - Page 17

If both SATA disks are empty, or you don't need

Page 17 highlights

STEP 8: Then you will see the following message: "Duplicate the SOURCE (Disk 1) data to RAID disks? N". If you press and , it will Create Mirror only. If you press and , it will duplicate the data on source disk to RAID disks. SiS RAID BIOS Setting Utility RAID Setup * Current Created Raid * RAID 1 Duplicate the SOURCE (Disk 1) data to RAID disks ? N [Q] : Exit current menu Location Disk 1 Disk 2 Model XXXXXX XXXXXX Capacity Mode RAID Type XXXXXX XXXX XXXXXXX XXXXXX XXXX XXXXXXX Copyright (c) 2003-2005. Silicon Integrated Systems Corp | www.sis.com NOTE If both SATA disks are empty, or you don't need the data any more, you should select to save your time. If you want to keep the data of the SOURCE disk, you should select . This mirror action may take several hours depending on the size of your HDD. 17

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25

17
SiS
RAID
BIOS
Setting
Utility
Copyright
(c)
2003-2005.
Silicon
Integrated
Systems
Corp
|
www.sis.com
RAID Setup
RAID 1
Duplicate the SOURCE (Disk 1) data to RAID disks ? N
[Q]
:
Exit
current
menu
Location
Model
Capacity
Mode
RAID Type
Disk 1
XXXXXX
XXXXXX
XXXX
XXXXXXX
Disk 2
XXXXXX
XXXXXX
XXXX
XXXXXXX
* Current Created Raid *
STEP 8:
Then you will see the following message: “Duplicate the SOURCE
(Disk 1) data to RAID disks? N”. If you press <N> and <Enter>, it will
Create Mirror only. If you press <Y> and <Enter>, it will duplicate
the data on source disk to RAID disks.
NOTE
If both SATA disks are empty, or you don’t need
the data any more, you should select <N> to save
your time. If you want to keep the data of the
SOURCE disk, you should select <Y>. This mirror
action may take several hours depending on the
size of your HDD.