ATI X800XL User Guide - Page 16
Dynamic Display Reassignment, To enable or disable a display, To save a display-device scheme
UPC - 727419412087
View all ATI X800XL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
10 ATI Displays Tab To enable or disable a display If the enable/disable button is green, it indicates the device is enabled. If it is red, it indicates the device is disabled. If the button is greyed out, the device is not an option. For example, if there is only one monitor connected, all buttons will be grey. 1 Click the enable/disable button want to enable/disable. for the display device you 2 Click OK or Apply to save the changes. Note: Due to power restrictions, you can normally only have two devices active at the same time; for example, two monitors or a monitor and a TV. To save a display-device scheme Display-device selections can be saved as a scheme for quick recall. 1 Click the enable/disable button want to have active. for the display devices you 2 Type a name into the Scheme drop-down list field. 3 Click Save to save the scheme. Dynamic Display Reassignment You can change the assignment of your Primary and Secondary display on the fly, without rebooting. However, before you can change the assignment of the Primary display, at least one Secondary display must be enabled, and Extended Desktop mode must be enabled. How to Assign Your Primary Monitor 1 Access the Windows® Control Panel. Double-click Display. 2 Click the Settings tab and then the Advanced button. 3 Click the ATI Displays tab. 4 Click the buttons to assign the primary monitor: For Window XP: