Adaptec 29320LPE User Guide - Page 21
Maximum Cable Lengths, of SCSI devices you can connect to the SCSI card. - ultra320 scsi
UPC - 760884154762
View all Adaptec 29320LPE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Chapter 4: Understanding SCSI ● 21 The following figure shows SCSI devices connected to the external connector. Terminated Device Maximum Cable Lengths The total length of cabling (internal and external) on the SCSI bus cannot exceed the maximum lengths listed in the following table. The third column lists the maximum number of SCSI devices you can connect to the SCSI card. Maximum Cable Length Data Transfer Rate Maximum Devices Supported 25 m (82.0 ft) Ultra320 SCSI (320 MB/sec) 1 Ultra160 SCSI (160 MB/sec) Ultra2 SCSI (80 MB/sec) 12 m (39.4 ft) Ultra320 SCSI (320 MB/sec)1 15 Ultra160 SCSI (160 MB/sec) Ultra2 SCSI (80 MB/sec) 3 m (9.8 ft) Fast Wide SCSI (20 MB/sec) 15 3 m (9.8 ft) Fast SCSI (10 MB/sec) 7 3 m (9.8 ft) Ultra SCSI (40 MB/sec for 16-bit, 20 MB/sec for 4 8-bit) 1.5 m (4.9 ft) Ultra SCSI (40 MB/sec for 16-bit, 20 MB/sec for 5-72 8-bit) 1 Mixing Fast/Ultra devices with Ultra320/Ultra160 and Ultra2 SCSI devices causes the entire SCSI bus to default to Ultra SCSI speeds and cable length requirements. 2 Ultra SCSI data transfer rates do not currently support more than seven devices connected to the SCSI card due to cable lengths.