Adaptec 29320LPE User Guide - Page 43
Using SCSI Disk Utilities, Listing SCSI IDs and LUNs
UPC - 760884154762
View all Adaptec 29320LPE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Chapter 8: Configuring the Adaptec SCSI Card with SCSISelect ● 43 Using SCSI Disk Utilities The disk utilities provide options for: ● Listing SCSI IDs and LUNs ● Verifying or Formatting a disk Listing SCSI IDs and LUNs With SCSISelect, you can list the SCSI IDs of devices attached to the SCSI card. This enables you to quickly verify that no devices on the SCSI bus have duplicate IDs. To view the SCSI IDs: 1 Start SCSISelect. See Starting SCSISelect on page 36. SCSISelect detects all Adaptec SCSI cards and displays the model number, channel letter, slot number, and PCI address for each SCSI card and channel. 2 Select the SCSI card and channel that has the devices you want to list. The Options menu appears. 3 Select SCSI Disk Utilities. SCSISelect scans the SCSI bus (to determine the devices installed) and displays a list of all SCSI IDs and the devices assigned to each ID. If a device does not show up in SCSISelect, check these items first: ● Is the device attached to the SCSI cable? ● Is there power to the device? ● Does the device have a unique SCSI ID? If two devices are on the same ID and are on the same bus, only one device or neither of the devices may show up. To correct this, make sure that each device has a unique SCSI ID. 4 Use the ↑ and ↓ keys to move the cursor to a specific ID and device, then press Enter.