Alpine 9965 Owners Manual - Page 15

M.I.X. (Random Play) 1 Press FUNC. to activate the audio function mode. Source select mode → Audio function mode → Source operation mode → Source select mode 2 Press the GlideTouch bar under M.I.X. to select the Random Play mode. The tracks (files) will be played back in random sequence. CD mode: ↓ M.I.X. ↓ M.I.X. ↓ (off)*4 : The tracks are played back in random sequence. *3 : The tracks on all the CDs in the current magazine will be played back in the random sequence. *3 When a CD changer equipped with the All M.I.X. function is connected. *4 When selecting the internal disc mode, RPT is illuminated. • If M.I.X. is set to ON during RPT (REPEAT ALL) play in CD changer mode, M.I.X. will apply to the current disc only. MP3/WMA mode: ↓ M.I.X. ↓ M.I.X. ↓ (off)*5 : Only files in a folder are played back in random sequence. : Files are played back in random sequence. If an MP3 compatible CD changer is connected, all files in a disc are played back in random sequence, and playback shifts to the next disc. *5 When selecting the internal disc mode, RPT is illuminated. • The function mode you previously recalled can be recalled again if the GlideTouch bar is touched. • If no operation is performed for 10 seconds, the audio function mode turns off. Scanning Programs 1 Press FUNC. to activate the audio function mode. Source select mode → Audio function mode → Source operation mode → Source select mode 2 Press the GlideTouch bar under SCAN to select the Scan mode. The first 10 seconds of each of track (file) will be played back in succession. 3 If the desired song is found, perform steps 1 and 2 to stop scanning. • The function mode you previously recalled can be recalled again if the GlideTouch bar is touched. • If no operation is performed for 10 seconds, the audio function mode turns off. Searching from CD Text Tracks can be searched and played by using the CD text on the disc. In the case of discs and changers that do not support text, searches can be made by using the track numbers. 1 Press during play. This will set the search mode. 2 Select the desired track by sliding your finger on the GlideTouch bar to the left or right. Press the GlideTouch bar under the Text of the desired Track. This will play the selected track. • Press and hold for at least 2 seconds in the search mode to cancel. Or the search mode will be canceled when an operation has not been performed in 10 seconds. • CD text search cannot be made during M.I.X. play. • Tracks are skipped continuously by touching and holding either side of the GlideTouch bar. File/Folder Name Search (concerning MP3/ WMA) You can display and search the folder and file name while listening to the file currently being played back. 1 Press in MP3/WMA mode. 2 Within 10 seconds, select the Folder search mode or File search mode by sliding your finger on the GlideTouch bar to the left or right. Press the GlideTouch bar under the desired search mode. Folder Name Search mode ↔ File Name Search mode Folder Name Search mode The desired folder is searched from all folders in a disc. File Name Search mode File is searched from all files in a disc or folder that is selected by folder search. Continued 13-EN