Alpine 9965 Owners Manual - Page 55

Storing Settings in the Memory Up to 6 settings can be stored on the unit. All settings and adjustments described below are stored in one memory preset. Setting/adjusting items Setting the Speakers Setting Time Correction/Switching Phase Adjusting EQ Adjusting X-OVER Setting MX Setting BASS COMP. Setting PRO LOGIC II/Adjusting the Centre Width* Adjusting Dolby Surround* Linear PCM Setting* Refer to page 46 47, 48 48, 49 46 46 49 52 50, 51 52 * Depending on the input signal, sound effect may not be obtained. 1 Press MENU. 2 Touch the GlideTouch bar, select AP Preset Mode by sliding it to the left or right, then press GlideTouch bar. 3 Touch the GlideTouch bar, select the preset number (1 through 6) by sliding it to the left or right, then press and hold the GlideTouch bar for at least 2 seconds to store the adjusted contents. • This function is operable only when Defeat is set to OFF. • The stored contents will not be deleted even when battery power cord is detached. Getting out the Preset Memory 1 Check that Defeat mode is off (page 20). 2 Press MENU. 3 Touch the GlideTouch bar, select AP Preset mode by sliding it to the left or right, then press the GlideTouch bar. 4 Touch the GlideTouch bar, and select a preset number (1 through 6) you wish to recall by sliding it to the left or right, then press the GlideTouch bar. • It takes a few moment to get out the preset memory. 53-EN