Alpine 9965 Owners Manual - Page 41
SAT Radio Receiver, Optional
UPC - 793276500526
View all Alpine 9965 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
SAT Radio Receiver (Optional) SOURCE/ POWER BAND -/J TITLE 8 g FUNC. MENU f 9 GlideTouch bar SAT Receiver: XM or SIRIUS Receiver When an optional XM or SIRIUS Receiver Box is connected via the Ai-NET bus, the following operations may be performed. However, the XM Receiver and SIRIUS Receiver cannot be connected at the same time. Receiving Channels with the SAT Radio Receiver (Optional) About SAT Radio Satellite Radio* is the next generation of audio entertainment, with over 100 digital audio channels. For a small monthly fee, subscribers can hear crystal-clear music, sports, news and talk, coast-to-coast via satellite. For more information, visit XM's website at www.xmradio.com., or SIRIUS' website at www.sirius.com. To receive SAT Radio, the separately sold XMDirect™ or SIRIUS Satellite Radio Tuner and an appropriate Ai-NET Interface Adapter will be required. For details, consult you nearest ALPINE dealer. * XM and its corresponding logos are trademarks of XM Satellite Radio Inc. * SIRIUS and its corresponding logos are trademarks of SIRIUS Satellite Radio Inc. • The SAT Receiver controls on the DVA-9965 are operative only when a SAT Receiver is connected. 1 Press SOURCE/POWER to select SAT Radio mode. 2 Press BAND to select between one of the three SAT Radio Preset Bands. Each press changes the band: XM mode: XM1 → XM2 → XM3 → XM1 SIRIUS mode: SIRIUS1 → SIRIUS2 → SIRIUS3 → SIRIUS1 3 Press 8 or 9 to select desired category. 4 Press g or f to select the desired channel. Holding down g or f will change channels continuously. • When using the optional remote control (RUE-4203), an SAT Radio Channel can be directly called up with the numeric keypad of the remote control. 1 While in XM or SIRIUS Radio mode, enter the Channel number you want to call up with the numeric keypad on the remote control. 2 Press ENTER on the remote control within 5 seconds to receive the Channel. If the channel number is 3 digits, the Channel is automatically received after the channel number is input. Checking the SAT Radio ID Number A unique Radio ID number is required to subscribe to SAT Radio programming. Each third party XM or SIRIUS radio comes with this number. This number is an 8 character (for XM Radio) or 12 character (for SIRIUS Radio) alphanumeric number. It is printed on a label found on the SAT Receiver. It can also be displayed on the screen of the DVA-9965 in the following way. 1 While receiving a SAT Radio band, press g or f to select channel "0" for XM and channel "255" for SIRIUS. ID number is displayed. 2 To cancel the ID number display, set the channel to other than "0" in the XM mode, and in the SIRIUS mode, set the channel to other than "255." • You cannot use "O," "S,"" I," or "F" for the ID Number (XM radio Receiver only). • You can check the ID number printed on a label on your third party, SAT Radio Receiver package. Storing Channel Presets 1 Press BAND to select the desired band you want to store. 2 After tuning in the desired channel, press FUNC. to activate the preset mode. 3 Select any one of the preset numbers (1 through 6) by sliding your finger on the GlideTouch bar to the left or right. Press and hold the GlideTouch bar for at least 2 seconds, under the desired preset to store the channel. 4 Repeat the procedure to store up to 5 other channels onto the same band. • To use this procedure for other bands, simply select the band desired and repeat the procedure. • A total of 18 channels can be stored in the preset memory (6 channels for each band; XM1, XM2 and XM3 or SIRIUS1, SIRIUS2 and SIRIUS3). • If you store a channel in a preset memory which already has a station, the current channel will be cleared and replaced with the new one. 39-EN