Alpine 9965 Owners Manual - Page 23

Selecting the EQ mode (Factory settings) 1 Press MENU. 2 Select the Factory's EQ mode by sliding your finger on the GlideTouch bar to the left or right. Press the GlideTouch bar under the Factory's EQ mode. 3 Select the desired equalizer characteristic by sliding your finger on the GlideTouch bar to the left or right. • By selecting USER'S 1 to 6, you can recall the stored preset number in "Adjusting and Storing the Graphic Equalizer Curve." (page 22) or "Adjusting and Storing the Parametric Equalizer Curve" (this page). 4 Press and hold MENU for at least 2 seconds to return to normal mode. • This function is inoperable when DEFEAT is set to ON (page 20). • If MENU is pressed while adjusting or setting the items in the MENU mode, the unit returns to the previous selection screen. • By pressing the GlideTouch bar under RETURN in the MENU mode, the unit will return to the normal mode. • If no operation is performed for 60 seconds, the unit will return to the normal mode. Setting User's EQ mode This setting gives you a choice of 9-band parametric, or 9-band graphic equalizer. 1 Press MENU. 2 Select Setup by sliding your finger on the GlideTouch bar to the left or right. Press the GlideTouch bar under Setup. The main SETUP menu is displayed. 3 Select AUDIO by sliding your finger on the GlideTouch bar to the left or right. Press the GlideTouch bar under AUDIO. The AUDIO SETUP menu is displayed. 4 Select EQ MODE by sliding your finger on the GlideTouch bar to the left or right. Press the GlideTouch bar under EQ MODE. 5 Select EQ Type by sliding your finger on the GlideTouch bar to the left or right. Press the GlideTouch bar under P.EQ or G.EQ. P.EQ : 9-band parametric EQ (initial setting) G.EQ: 9-band graphic EQ 6 Press and hold MENU for at least 2 seconds to return to normal mode. • If MENU is pressed while adjusting or setting the items in the MENU mode, the unit returns to the previous selection screen. • By pressing the GlideTouch bar under RETURN in the MENU mode, the unit will return to the normal mode. • If no operation is performed for 60 seconds, the unit will return to the normal mode. Adjusting and Storing the Parametric Equalizer Curve You can modify the Equalizer settings to create a response curve more appealing to your personal taste. To adjust the parametric equalizer curve, set the EQ mode to P.EQ. For details, refer to "Setting User's EQ mode" (this page). 1 Press and hold MENU for at least 2 seconds. 2 Select the Parametric EQ mode by sliding your finger on the GlideTouch bar to the left or right. Press the GlideTouch bar under the Parametric EQ mode. 3 Press BAND to select the band to be adjusted. BAND1 → BAND2 →... BAND9 → BAND1 4 Select the frequency by sliding your finger on the GlideTouch bar to the left or right. 5 Adjust the level by turning the Rotary encoder. Adjustable level: ±7step (1step:1.3 dB) 6 Press SOURCE/POWER to set the band width (Q). 7 To adjust another band, repeat steps 3 to 6 and adjust all bands. 8 When the setting has been completed, press FUNC. or the GlideTouch bar to activate the preset mode. 9 Select any one of the preset numbers (1 through 6) by sliding your finger on the GlideTouch bar to the left or right. Press and hold the GlideTouch bar under the desired preset for at least 2 seconds. The adjustments are saved in the selected preset. 10 After setting, press and hold MENU for at least 2 seconds to return to normal mode. • This function is inoperable when DEFEAT is set to ON (page 20). • If MENU is pressed while adjusting or setting the items in the MENU mode, the unit returns to the previous selection screen. • By pressing the GlideTouch bar under RETURN in the MENU mode, the unit will return to the normal mode. • If no operation is performed for 60 seconds, the unit will return to the normal mode. 21-EN