Alpine 9965 Owners Manual - Page 72

System Example Connect the External Monitor The following example shows a system connection using the S-Video output to a front monitor with S-Video input and a touch panel compatible rear monitor. M.CONT (Rear) 1 (White/Pink) REMOTE IN (Rear) 2 (White/Brown) M.CONT (White/Pink) REMOTE OUT (White/Brown) To Video Input 4 6 terminal Touch panel compatible monitor 5 (sold separately) 7 To Audio Input terminal 3 Monitor with S terminal (sold separately) 1 Monitor Control Lead (Rear) (White/Pink) Connect this to the Monitor Control Lead of the touch panel compatible rear monitor. 2 Remote Control Input Lead (Rear) (White/Brown) Connect this to the remote control output lead for the rear monitor (Alpine's). 3 S video cable (Included) 4 Video Output connectors (Yellow) 5 Audio Output connectors 6 RCA Extension Cable (Included) 7 RCA Extension Cable (Sold separately) Connect the Ai-NET compatible audio processor (Fiber digital compatible) and changer 1 Fiber optic cable Fiber digital Input terminal (for head unit) Audio processor (Ai-NET) (Fiber digital compatible) (sold separately) Fiber digital Input terminal (for changer) 4 33 Ai-NET cable * Fiber optic cable 2 Ai-NET cable 1 Please observe the following when using Fiber Optic Cable. • Do not coil the Fiber Optic Cable smaller than a 30 mm radius. • Do not place anything on top of the Fiber Optic Cable. • Be careful not to bend the Fiber Optic Cable at a sharp angle. CD changer (Ai-NET) (sold separately) * Only connect fiber digital compatible CD changer 1 Fiber optic Cable (Sold Separately) 2 Ai-NET Cable (Included with CD Changer) 3 Ai-NET Connector Connect this to the output or input connector of other product equipped with Ai-NET. 4 Ai-NET Cable (Included with Audio Processor) 70-EN