Alpine CDA 105 Cda-105 Owners Manual - Page 15
Setting the Subwoofer Level, Setting the Bass Control, Setting the Treble Control - subwoofer level control
UPC - 793276711588
View all Alpine CDA 105 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Setting the Subwoofer Level You can change the Subwoofer Level to create your own tonal preference. 1 Press SOUND SETUP to activate the Sound Setting mode. 2 Turn the Rotary encoder to select the SUBW LEVEL Adjustment mode, and then press /ENT. SUBW LEVEL*1 BASS*2 TREBLE*2 HPF*2 SUBW LEVEL 3 Turn the Rotary encoder to select the desired subwoofer level (0~+15). • If no operation is performed for 15 seconds, the unit will return to normal mode automatically. • When subwoofer is set to OFF and DEFEAT is set to ON, pressing the SOUND SETUP button momentarily will not be functional. *1 When the subwoofer mode is set to OFF, its level cannot be adjusted, refer to "Turning Subwoofer ON/OFF" (page 14). The adjustment can also be made by pressing Rotary encoder (AUDIO). Refer to "Adjusting Subwoofer Level/Bass Level/Treble Level/Balance (Between Left and Right)/Fader (Between Front and Rear)/Defeat" (page 12). *2 The function is inoperable when DEFEAT is set to ON. Setting the Bass Control You can change the Bass Frequency emphasis to create your own tonal preference. 1 Press SOUND SETUP to activate the Sound Setting mode. 2 Turn the Rotary encoder to select the BASS Adjustment mode, and then press /ENT. SUBW LEVEL*3 BASS*4 SUBW LEVEL TREBLE*4 HPF*4 Setting the Bass Center Frequency 3-1 Press BAND to select the desired bass center frequency. 80 Hz 100 Hz 200 Hz 60 Hz 80 Hz Emphasizes the displayed bass frequency ranges. Setting the Bass Bandwidth 3-2 Press SOURCE/ to select the desired bass bandwidth. 1 2 3 4 Changes the boosted bass bandwidth to wide or narrow. A wider setting will boost a wide range of frequencies above and below the center frequency. A narrower setting will boost only frequencies near the center frequency. Setting the Bass Level 3-3*5 Turn the Rotary encoder to select the desired bass level (-7~+7). You can emphasize or weaken the bass level. 4 Press and hold /ESC for at least 2 seconds to return to normal mode. • If no operation is performed for 15 seconds, the unit will return to normal mode automatically. • The bass level settings will be individually memorized for each source (FM, AM, CD, etc.) until the setting is changed. The bass frequency and bass bandwidth settings adjusted for one source are effective for all other sources (FM, AM, CD, etc.). • Depending on the connected devices, some functions and display indications do not work. However, Bass Level is still adjustable if an audio processor with the Bass function is connected. • When subwoofer is set to OFF and DEFEAT is set to ON, pressing the SOUND SETUP button momentarily will not be functional. *3 When the subwoofer mode is set to OFF, its level cannot be adjusted. Refer to "Turning Subwoofer ON/OFF" (page 14). *4 The function is inoperable when DEFEAT is set to ON. *5 The adjustment can also be made by pressing Rotary encoder (AUDIO). Refer to "Adjusting Subwoofer Level/Bass Level/Treble Level/Balance (Between Left and Right)/Fader (Between Front and Rear)/Defeat" (page 12). Setting the Treble Control You can change the Treble Frequency emphasis to create your own tonal preference. 1 Press SOUND SETUP to activate the Sound Setting mode. 2 Turn the Rotary encoder to select the TREBLE Adjustment mode, and then press /ENT. SUBW LEVEL*6 BASS*7 SUBW LEVEL TREBLE*7 HPF*7 Setting the Treble Center Frequency 3-1 Press BAND to select the desired treble center frequency. 10.0 kHz 12.5 kHz 15.0 kHz 17.5 kHz 10.0 kHz Emphasizes the displayed treble frequency ranges. Setting the Treble Level 3-2*8 Turn the Rotary encoder to select the desired treble level (-7~+7). You can emphasize or weaken the treble level. 4 Press and hold /ESC for at least 2 seconds to return to normal mode. • If no operation is performed for 15 seconds, the unit will return to normal mode automatically. • The treble level settings will be individually memorized for each source (FM, AM, CD, etc.) until the setting is changed. The Treble frequency settings adjusted for one source are effective for all other sources (FM, AM, CD, etc.). 13-EN