Alpine CDA 105 Cda-105 Owners Manual - Page 40

(XM mode) • The selected channel is not functional. - Change channels. • The user has selected a channel number that does not exist or is not subscribed to. - The unit will revert back to the previously selected channel. • There is no artist name/feature, song/program title, or additional information associated with the channel at that time. - No action needed. Indication for iPod Mode • The iPhone/iPod is not connected. - Make sure the iPhone/iPod is correctly connected (refer to "Connections" on page 43). Make sure the cable is not bent excessively. • There are no songs in the iPhone/iPod. - Download songs to the iPhone/iPod and connect to this unit. • If an error or other problem occurs. - Change channels or consult your Alpine dealer. Indication for USB memory • Communication error - Turn the ignition key off, and then set to ON again. - Check the display by reconnecting between the iPhone/iPod and this unit, using the iPod cable. • Communication error - Turn the ignition key off, and then set to ON again. • Caused by the iPhone/iPod Software Version not being compatible with this unit. - Update the iPhone/iPod Software Version to be compatible with this unit. • Abnormal current is run to the USB connector device. - You can solve the problem by switching the source, turning the unit power off, or ACC to the OFF position. • The iPhone/iPod is not verified. - Change another iPhone/iPod. • A USB device that is not supported by the unit is connected. - Connect a USB device that is supported by the unit. • Abnormal current is run to the USB connector device. - You can solve the problem by switching the source, turning the unit power off, or ACC to the OFF position. • A USB memory is not connected. - Make sure the USB memory device is correctly connected and the cable is not excessively bent. NO FILE • No song (file) is stored in the USB memory. - Connect the USB memory device after storing songs (files). • A sampling rate/bit rate not supported by the unit is used. - Use a sampling rate/bit rate that is supported by the unit. • A USB device that is not supported by the unit is connected. - Connect a USB device that is supported by the unit. Indication for all Modes • Malfunction occurred as a result of the speaker cable shorting on the car chassis. - Route the cable correctly, and set POWER IC to ON (page 17). If the above solution does not work, consult your nearest dealer. • A copy-protected WMA file was played back. - You can only play back non-copy-protected files. 38-EN