Alpine CDA 105 Cda-105 Owners Manual - Page 16
Adjusting the High Pass Filter, Turning Loudness On/Off, Turning Subwoofer ON/OFF, Setting - sound
UPC - 793276711588
View all Alpine CDA 105 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
• Depending on the connected devices, some functions and display indications do not work. However, Treble Level is still adjustable if an audio processor with the Treble function is connected. • When subwoofer is set to OFF and DEFEAT is set to ON, pressing the SOUND SETUP button momentarily will not be functional. *6 When the subwoofer mode is set to OFF, its level cannot be adjusted. Refer to "Turning Subwoofer ON/OFF" (page 14). *7 The function is inoperable when DEFEAT is set to ON. *8 The adjustment can also be made by pressing Rotary encoder (AUDIO). Refer to "Adjusting Subwoofer Level/Bass Level/Treble Level/Balance (Between Left and Right)/Fader (Between Front and Rear)/Defeat" (page 12). Adjusting the High Pass Filter The High Pass Filter on this unit can be adjusted to suit your personal taste. 1 Press SOUND SETUP to activate the Sound Setting mode. 2 Turn the Rotary encoder to select the High Pass Filter (HPF) Adjustment mode, and then press /ENT. SUBW LEVEL*9 BASS*10 TREBLE*10 HPF*10 SUBW LEVEL 3 Turn the Rotary encoder to select the High Pass Filter frequency. OFF 60 Hz 80 Hz 100 Hz 4 Press and hold /ESC for at least 2 seconds to return to normal mode. • If no operation is performed for 15 seconds, the unit will return to normal mode automatically. • When an external audio processor is connected, this setting cannot be made. • When subwoofer is set to OFF and DEFEAT is set to ON, pressing the SOUND SETUP button momentarily will not be functional. *9 When the subwoofer mode is set to OFF, its level cannot be adjusted. Refer to "Turning Subwoofer ON/OFF" (page 14). *10The function is inoperable when DEFEAT is set to ON. Turning Loudness On/Off Loudness introduces a special low-and high-frequency emphasis at low listening levels. This compensates for the ear's decreased sensitivity to bass and treble sound. Press and hold Rotary encoder (LOUD) for at least 2 seconds to activate or deactivate the loudness mode. • When an external audio processor is connected, this setting cannot be made. • The function is inoperable when DEFEAT is set to ON. Turning Subwoofer ON/OFF When the subwoofer is on, you can adjust the subwoofer output level (refer to page 13). 1 Press and hold SOUND SETUP for at least 2 seconds to activate the Subwoofer selection mode. 2 Turn the Rotary encoder to select the SUBWOOFER mode, and then press /ENT. SUBWOOFER SUBW SYSTEM*11 SUBWOOFER 3 Turn the Rotary encoder to select SUBW ON/OFF, and then press /ENT. SUBW ON (Initial setting) SUBW OFF 4 Press and hold /ESC for at least 2 seconds to return to normal mode. • If no operation is performed for 15 seconds, the unit will return to normal mode automatically. *11Displayed only when SUBWOOFER is set to ON. Setting the Subwoofer System When the subwoofer is on, you can select either System1 or System2 for the desired subwoofer effect. 1 Press and hold SOUND SETUP for at least 2 seconds to activate the Subwoofer selection mode. 2 Turn the Rotary encoder to select the SUBW SYSTEM mode, and then press /ENT. SUBWOOFER SUBW SYSTEM SUBWOOFER 3 Turn the Rotary encoder to select SUBW SYS 1 or SUBW SYS 2, and then press /ENT. Select either SYS 1 or SYS 2 for the desired subwoofer effect. SUBW SYS 1 (Initial setting) SUBW SYS 2 SUBW SYS 1: Subwoofer level changes according to the main volume setting. SUBW SYS 2: Subwoofer level change is different from the main volume setting. For example, even at low volume settings, the subwoofer is still audible. 4 Press and hold /ESC for at least 2 seconds to return to normal mode. • If no operation is performed for 15 seconds, the unit will return to normal mode automatically. • This function is inoperable when SUBWOOFER is set to OFF. 14-EN