Alpine CDA 105 Cda-105 Owners Manual - Page 37

Changer (Optional) SOURCE/ BAND / F/SETUP Select buttons (1 through 6) Controlling CD Changer (Optional) An optional 6-disc or 12-disc CD Changer may be connected to this unit if it is Ai-NET compatible. With a CD Changer connected to the Ai-NET input of this unit, the CD Changer will be controllable from this unit. Using the KCA-400C (Multi-Changer Switching device) or the KCA-410C (Versatile Link Terminal) multiple changers can be controlled by this unit. See "Multi-Changer Selection (Optional)" on page 35 for selecting the CD Changers. • The controls on this unit for CD Changer operation are operative only when a CD Changer is connected. • The DVD changer (optional) is controllable from this unit as well as the CD changer. 1 Press SOURCE/ to activate the CHANGER mode. • The source indicator varies depending on the connected source. • Press BAND to switch the Disc mode in the Changer mode. 2 Press F/SETUP to activate Disc Select mode. Disc Select Mode (Disc No.1~6) Disc Select Mode * (Disc No.7~12) RPT/M.I.X. Mode Disc Select Mode (Disc No.1~6) 3 Press the disc select buttons (1 through 6) corresponding to one of the discs loaded in the CD Changer. The selected disc number appears in the display and CD/MP3 playback starts. • After selecting the desired disc, you can operate in the same way as for the CD player of this unit. For details, see the CD/MP3/WMA/ AAC section. * When a 12-disc CD changer is connected. Playing MP3 Files with the CD Changer (Optional) If you connect a changer compatible with MP3, you can play CD-ROMs, CD-Rs, and CD-RWs containing MP3 files on this unit. 1 Press SOURCE/ to switch to the MP3 Changer mode. 2 Press any one of the disc select buttons (1 through 6) corresponding to one of the discs loaded in the CD Changer. 3 To pause playback, press / . Pressing / again will resume playback. • The unit can play discs containing both audio data and MP3 data. • For operating MP3 with an MP3 compatible CD Changer, refer to "CD/MP3/WMA/AAC" page 9 to 12. Multi-Changer Selection (Optional) Alpine's Ai-NET system will support up to 6 CD Changers. When operating two or more changers, the KCA-400C (Multi-Changer Switching device) must be used. If you use 1 Switching device, you can connect up to 4 CD Changers. If you use 2 Switching devices, you can connect up to 6 CD Changers. When using KCA-410C (Versatile Link Terminal), you can connect two changers and two external outputs (AUX). 1 Press SOURCE/ on this unit to activate the CD Changer mode. Alternatively, press SOURCE on the remote control (RUE-4202) to activate the CD Changer mode. SOURCE BAND 2 Press BAND on this unit or the RUE-4202 to activate the CD Changer Selection mode. The CD Changer Selection mode remains active for a few seconds. 3 Press BAND until the desired CD Changer indicator appears on the display. Alternatively press BAND on the Remote Control until the desired changer indicator appears on the display. • If the selected CD Changer is not connected, the display will show "NO CHANGER-(No.)". • To operate the selected changer, see "CD/MP3/WMA/AAC" (pages 9 to 12). • For further details about the external input (AUX) when using KCA-410C, see "Setting the AUX Mode (V-Link)" on page 18. 35-EN