Alpine CDA 105 Cda-105 Owners Manual - Page 44

Remove the iPhone/iPod Remove the iPhone/iPod from Interface cable for iPod (KCU-440i, sold separately). • After changing the unit to a source other than the iPhone/iPod, remove the iPhone/iPod. If the iPhone/iPod is removed in the iPod mode, data may cause damage. • If sound is not output or the iPhone/iPod is not recognised even when the iPhone/iPod is connected, remove the iPhone/iPod once, then connect it again, or reset the iPod. • Do not leave the iPhone/iPod in a vehicle for a long time. Heat and humidity may damage the iPhone/iPod and you may not be able to play it again. USB memory Connection (sold separately) Connect USB memory Connect USB memory to USB cable. This unit Lock case (Included with cable) USB memory (sold separately) Cable (sold separately) Remove USB memory Pull out USB memory squarely from the USB cable. This unit USB connector USB memory (sold separately) Cable (sold separately) • When removing USB memory, pull it out straight. • If sound is not output or USB memory is not recognized even when USB memory is connected, remove USB memory once, then connect it again. • Change to a source other than the USB memory mode, then remove the USB memory. If the USB memory is removed in the USB memory mode, data may be damaged. • Route the USB cable away from another cables, etc. 42-EN