Alpine CDA 105 Cda-105 Owners Manual - Page 26

Playback 1 Press SOURCE/ to switch to the USB iPod mode. TUNER XM RADIO/SIRIUS*1 DISC USB AUDIO*2/ USB iPod*3 BT AUDIO*4/AUX+*5 CHANGER*6 TUNER *1 Only when XM Radio or SIRIUS Radio is connected. *2 Displayed only when no iPhone/iPod is connected. *3 Displayed only when the iPhone/iPod is connected. *4 Displayed only when BLUETOOTH IN is set to ADAPTE, refer to "Setting the Bluetooth Connection" (page 17). *5 Displayed only when the AUX+ SETUP is set to ON, refer to "Setting the AUX+ SETUP Mode" (page 18). *6 Only when the CD changer is connected. 2 Press or to select the desired song. Return to the beginning of the current song: Press . Fast backward through current song: Press and hold . Advance to the beginning of the next song: Press . Fast forward through current song: Press and hold . 3 To pause playback, press / . Pressing / again will resume playback. • A song playing on the iPhone/iPod while it is connected to this unit will continue to play from where it was paused after disconnection. • If you listen to an episode from a selected podcast or audiobook, the episode can be changed by pressing or . • An episode may have several chapters. The chapter can be changed by pressing or . Searching for a desired Song An iPhone/iPod can contain hundreds of songs. By using file tag information and keeping these songs organized in playlists, this unit's search functions will ease song searches. Each music category has its own individual hierarchy. Use the PLAYLIST/ARTIST/ALBUM/SONG/PODCAST/GENRE/ COMPOSER/AUDIOBOOK search mode to narrow searches based on the table below. Hierarchy 1 PLAYLIST ARTIST* ALBUM* SONG PODCAST GENRE* COMPOSER* AUDIOBOOK Hierarchy 2 SONG ALBUM* SONG - EPISODE ARTIST* ALBUM* - Hierarchy 3 - SONG - - - ALBUM* SONG - Hierarchy 4 - - - - - SONG - - For example: Searching by Artist name The following example explains how an ARTIST search is performed. Another search mode can be used for the same operation, although the hierarchy differs. 1 Press /ENT to activate the search selection mode. 2 Turn the Rotary encoder to select the Artist search mode, and then press /ENT. PLAYLIST ARTIST ALBUM SONG PODCAST GENRE COMPOSER AUDIOBOOK PLAYLIST 3 Turn the Rotary encoder to select the desired Artist, and then press /ENT. 4 Turn the Rotary encoder to select an album, and then press /ENT. 5 Turn the Rotary encoder to select a song and press /ENT. The selected song is played back. • After pressing and holding /ENT for at least 2 seconds while in each hierarchy (except SONG and AUDIOBOOK hierarchy), all songs of the selected hierarchy are played back. • After selecting [ALL] in the search mode with "*", press and hold /ENT for at least 2 seconds to play back all songs in the iPhone/ iPod or selected search mode. • While in the search mode, if you press and hold /ESC for at least 2 seconds, or no operation is performed for 30 seconds, the search mode is canceled. • In the search mode, pressing /ESC will return to the previous mode. • When search is made during M.I.X. play, the M.I.X. play mode will be canceled. • "NO SONG" will be displayed if there is no song in the selected playlist in the PLAYLIST search mode. • "NO PODCAST" will be displayed if there is no podcast data in the iPhone/iPod in the PODCAST search mode. • "NO AUDIOBOOK" will be displayed if there is no audiobook data in the iPhone/iPod in the AUDIOBOOK search mode. • If "iPod name" stored in the iPhone/iPod is selected in the desired playlist search mode and /ENT is pressed, you can search for all songs in the iPhone/iPod. Also, if you press and hold /ENT for at least 2 seconds, all songs in the iPhone/iPod are played back. • Depending on the iPhone/iPod, podcast search is not supported. • If Alphabet Skip Function is activated in the search mode, a search can be made quickly by Alphabet skip function to find the desired artist or song, etc. For details, refer to "Alphabet Skip Function" on page 25. • If any one of the preset buttons (1 through 6) is pressed in the search mode, a search can be made quickly by skipping to the specified location. For details, refer to "Direct Search Function" on page 25. • If no operation is performed for 30 seconds during search mode, the unit will return to normal mode. 24-EN