Alpine HCE-C157D Owners Manual - Page 4
About Camera Installation Location
View all Alpine HCE-C157D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
• Be sure to connect the color coded leads according to the diagram. Incorrect connections may cause the unit to malfunction or damage to the vehicle's electrical system. • When making connections to the vehicle's electrical system, be aware of the factory installed components (e.g. on-board computer). Do not tap into these leads to provide power for this unit. When connecting the HCE-Cl57D to the fuse box, make sure the fuse for the intended circuit of the HCE-Cl57D has the appropriate amperage. Failure to do so may result in damage to the unit and/or the vehicle. When in doubt, consult your Alpine dealer. • About Rear Camera The rear camera of this camera system is a dedicated product. Do not connect it to other cameras. • About Power Connection Connect a reverse input cable (orange/white) to the power cable of the rear lamp. For details, consult a dealer purchased camera, or car dealer. Connect this to a power cable of the rear lamp, but not to the positive of the rear lamp signal cable. • Do not use mobile phones and wireless devices near the camera. • Doing so may result in noise on the screen or malfunction. It is recommended to use mobile phones or wireless devices away from the camera. • About Camera Installation Location Before installing, make sure there is a enough space to be able to install the camera. If possible, install the camera in the center of the bumper or other fitting. If the camera is installed at a distance left or right of center, the image may differ from the real view. • Confirming the Display Function To connect the unit, confirm that the monitor will require a compatible RCA pin jack.