Asko W6124XW Use and Care Guide English - Page 11
Installation And Connection
View all Asko W6124XW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
INSTALLATION AND CONNECTION POSITIONING THE WASHING MACHINE Read these instructions carefully and completely before you install the machine. The installation should be carried out by a qualified person who is familiar with all local codes and ordinances for electrical and plumbing connections. Cosmetic damage must be reported to your dealer within five days from the date of purchase. After unpacking the washer, thoroughly check the unit for cosmetic damage. Improper connection of the equipmentgrounding conductor can result in a risk of electric shock. Check with a qualified electrician or servicer if you are in doubt as to whether the appliance is properly grounded. Do not modify the plug provided with the appliance. If it will not fit the outlet, have a proper outlet installed by a qualified electrician. Clearances around the washing machine The washing machine can be installed as a builtin (integrated) or a freestanding unit. Place the machine on a level surface so that the power outlet on the wall is accessible. min. 50 mm (2") Before connecting the washing machine to the power mains, wait for at least 2 hours until it reaches room temperature. Grounding instructions This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. This appliance is equipped with a cord having an equipmentgrounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances. min. 50 mm (2") min. 50 mm (2") Opening the washing machine door (top view) 1057 mm (41.61") Freestanding installation The washer can be placed next to the dryer. It is essential that the machine is leveled and the locknuts are tightened to prevent excessive vibration during spin cycles. Also be sure to leave a minimum of ½" of space between the washer and the dryer. The height adjustment for the washer is 35½" to 37½" (900 mm to 950 mm). Do not raise it higher than 34½" (876 mm). 110° 376 mm (14.80") Stacked installation ASKO washers should never be stacked on a counter or a dryer. You can, however, stack an ASKO dryer on an ASKO washer. Refer to your Dryer Use and Care Guide for instructions on how to do this. Stacking an ASKO dryer on top of an ASKO washing machine To stack an ASKO dryer on top of a washing machine, use the extra vacuum feet and the tipping guard (A+B), supplied in the cardboard box in the Customer Care Center, 1-800-898-1879, www.askona.com 11