Asko W6124XW Use and Care Guide English - Page 42

3. Filling the compartment with liquid detergent Before adding the liquid detergent into the tank, pull out the detergent compartment as far as it will go. (If the detergent compartment is not fully opened, the liquid detergent will not flow into the tank.) The washing machine has to be switched on. Please do not fill detergent (liquid detergent) while program is running! Start adding the liquid detergent to the selected compartment. The level for the selected compartment, indicated on the display unit, will increase. When the compartment is full, stop adding the detergent. (maximum amount of detergent that can be added to selected compartment is 1.5 l (0.39 gal)). Tank B is full The maximum level for Auto dose tank B has been reached. Ok Before closing the dosing tank, wait for 1 minute to let the detergent flow into the compartment. If you add too much liquid detergent, it may overflow into the washing machine drum. To remove the detergent from the drum, use the Rinse program. Warning - Over flow of tank B Start Rinse program if you want to remove detergent from drum. Ok 4. Choosing the ADS settings by opening the detergent compartment Pull out the detergent compartment as far as it will go, to its end position! The ADS setting in the Main Menu will be displayed. All steps are the same as with section 2 (Choosing the ADS settings in the Main menu). If you selected OFF in the Settings (i.e. do not display the ADS menu in the Main Menu), then the ADS menu will not be displayed when you open the detergent compartment. Only add liquid detergents into the ADS tanks. Do not mix liquid detergent with conditioner. Do not add conditioner into any ADS tank; conditioner has to be added manually to the compartment labelled with . 42 Customer Care Center, 1-800-898-1879, www.askona.com