Asko W6124XW Use and Care Guide English - Page 30

3. Temperature The following temperatures are available for the selected program: Cold / Warm / Hot / Extra Hot The actual available temperature options will depend on the selected program. WASH Cold Warm Hot Extra Hot TEMPERATURE / 40°C / 105°F 60°C / 140°F 90°C / 194°F WASH / RINSE No Heating Warm / Cold Hot / Cold Extra Hot / Cold 4. Spin speed The following spinning rates are available for the selected program: No drain / No spin / Min / Max (rpm) (depends on the model). Default setting is MAX rpm; it depends on the selected program (spin rate can be changed - reduced or increased (only in some models)). The actual available spin speed will depend on the selected washing program. With the No drain option, the program will not include a spin cycle, and the water from the last rinse will remain in the washing machine. The laundry will stay in the water from the last rinse, which will prevent creasing. If you have selected the No d (No Drain) option, you have to select the Drain or Spinning program after the end of the washing program to pump the water out from the machine before you open the washing machine door. 5. Delay start Choose the delayed start when you wish the washing program to start after a certain period of time (30 minutes) to 24 hours after you press the Start button). Set delay start Off 30 min 1 h 1,5 h Use the Program selector knob to set the delay from 30 minutes to 6 hours in 2 h 30-minute increments, and then from 6 Back hours to 24 hours in 1-hour increments. Press the button to confirm your selection. EvEevreyrdyadyawy awsahsh Program MModee W4a0r°Cm TTemmpp 1M0a0x0 SSpiinn 2:00 h + 1:42 h The estimated start delay time and time remaining until the end of the washing 2 h 1:30 h program will be indicated in the top line. DeOlapytiosntsart DOeplatyio/ns When the countdown reaches zero, the selected washing program will start automatically. To cancel or skip the delay and start the washing process immediately, press the 5 button (Skip). When Start delay time is once set, it is not possible to change it; the only possibility is to »Skip it« (Skip delay) and continue with chosen program. If you have set the delayed start function and you are using liquid detergent, we do not recommend choosing a programme with a pre-wash cycle. 30 Customer Care Center, 1-800-898-1879, www.askona.com