Asus K7M K7M User Manual - Page 28
Smart Thermal Solutions
View all Asus K7M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
3. H/W SETUP CPU 3. HARDWARE SETUP 3.6.4 Smart Thermal Solutions Two smart solutions to Slot A CPU thermal problems are available from ASUSTeK COMPUTER INC.: the ASUS Smart Fan or ASUS S-K7FAN and the ASUS P2TCable. ASUS S-K7FAN The optional ASUS Smart Fan or ASUS S-K7FAN is a CPU fan for a processor packaged in a Single Edge Contact Cartridge (SECC). Unlike other CPU thermal solutions, the ASUS S-K7FAN has an integrated thermal sensor located near the center of the CPU heat source. The sensor is optimized to give the most accurate reading of the CPU temperature, thus provides the best protection to your computer system. Thermal Cable CPU Fan Cable (2 black wires) (3 colored wires) To Use the ASUS S-K7FAN See 2. Attach the Heatsink on the preceding page for the relevant procedures. Note that the S-K7FAN comes with a rock arm design for easy FAN/CPU installation. ASUS P2T-Cable The optional ASUS P2T-Cable can be used for a processor packaged in an Sensor SECC2/SECC/SEPP. NOTE: The ASUS P2T-Cable can only be used in a Slot A motherboard with a 2-pin thermal sensor connector. Sensor Connector Plug To Use the ASUS P2T-Cable NOTE: The following procedures assume that you have properly attached a heatsink onto an SECC2/SECC/SEPP. 1. Simply peel off the tab from the sensor and then stick the sensor near the middle edge of the boxed processor heatsink with fan, as indicated. Tab Sensor 28 ASUS K7M User's Manual