Asus K7M K7M User Manual - Page 66

Peripheral Setup

Get Asus K7M - Motherboard - ATX PDF manuals and user guides View all Asus K7M manuals
Add to My Manuals
Save this manual to your list of manuals

Page 66 highlights

4. BIOS SETUP 4.4.5 Peripheral Setup 4. BIOS SETUP Peripheral Onboard FDC [Auto] [Auto] allows the motherboard to detect whether you have a separate floppy disk drive controller (FDC). If a separate card is detected, the onboard FDC will be disabled. If no separate card is detected, the onboard FDC will be enabled. When [Enabled] is selected, you may connect your floppy disk drives to the onboard floppy disk drive connector without using a separate controller card. If you want to use a different controller card to connect the floppy disk drives, set this to [Disabled]. OnBoard Serial Port1 / OnBoard Serial Port2 [Auto] These fields allow you to set the addresses and COM ports for the onboard serial connectors. [Auto] detects whether you are using any devices on these connectors. If yes, the BIOS program automatically assigns addresses and COM ports for these connectors. You may also select addresses and ports manually, but Serial Port 1 and Serial Port 2 must have different addresses. [Disabled] prevents the serial ports from working. Available options: [Auto] [Disabled] [3F8/COM1] [2F8/COM2] [3E8/ COM3] [2E8/COM4] Serial Port2 Mode [Normal] If your system already has a second serial port connected to the onboard COM2 connector and you do not want to use the infrared feature, leave on the default setting [Normal]. The option [IrDA] reserves the serial port 2 for IrDA infrared communications while the option [ASK IR] reserves the serial port 2 for Amplitude Shift Keyed (ASK) infrared communications. IR Pins / Duplex Mode / Receiver Polarity / Transmitter Polarity [N/A] These fields are only selectable when Serial Port2 Mode is set to [IrDA] or [ASK IR]. 66 ASUS K7M User's Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
ASUS K7M User’s Manual
66
4. BIOS SETUP
4. BIOS SETUP
Peripheral
4.4.5
Peripheral Setup
Onboard FDC [Auto]
[Auto] allows the motherboard to detect whether you have a separate floppy disk
drive controller (FDC). If a separate card is detected, the onboard FDC will be dis-
abled. If no separate card is detected, the onboard FDC will be enabled. When [En-
abled] is selected, you may connect your floppy disk drives to the onboard floppy
disk drive connector without using a separate controller card. If you want to use a
different controller card to connect the floppy disk drives, set this to [Disabled].
OnBoard Serial Port1 / OnBoard Serial Port2 [Auto]
These fields allow you to set the addresses and COM ports for the onboard serial
connectors. [Auto] detects whether you are using any devices on these connectors.
If yes, the BIOS program automatically assigns addresses and COM ports for these
connectors. You may also select addresses and ports manually, but Serial Port 1 and
Serial Port 2 must have different addresses. [Disabled] prevents the serial ports from
working. Available options: [Auto] [Disabled] [3F8/COM1] [2F8/COM2] [3E8/
COM3] [2E8/COM4]
Serial Port2 Mode [Normal]
If your system already has a second serial port connected to the onboard COM2
connector and you do not want to use the infrared feature, leave on the default set-
ting [Normal]. The option [IrDA] reserves the serial port 2 for IrDA infrared com-
munications while the option [ASK IR] reserves the serial port 2 for Amplitude
Shift Keyed (ASK) infrared communications.
IR Pins / Duplex Mode / Receiver Polarity / Transmitter Polarity [N/A]
These fields are only selectable when
Serial Port2 Mode
is set to [IrDA] or [ASK IR].